MO36000
Features
- Great solution for problem water.
- Up to 36,000 litres of treated water, every day.
- Adjustable permeate amount, depending on water quality.
- Continuous water quality monitoring and system operation via the OC6000 controller.
- Removes 99.8% of impurities.
- Reliable, efficient, low noise and easy to maintain.
Information
MO36000
The MO36000 is an eco-friendly, economic reverse osmosis system that is able to remove up to 99.8% of impurities from your water. It can produce up to 36000 litres of purified water every day; ideal for steam boilers, generators laboratories and workshops.
How it Works
Water that is passed through the MO36000 is divided into two streams; Purified water (permeate), and high salt water (concentrate). Whereas the purified water is made available to you, the high salt water is discharged into the sewerage system. However, a part of the high salt water is passed back through the inlet pump, allowing another pass through the Reverse Osmosis process. This recycling allows you to regain water as purified water that would otherwise have been discharged into the sewerage system.
Pre-Filter
The MO36000 also has a pre-filter which cleans the water and stops any impurities larger than 5 microns from damaging the Reverse Osmosis membrane. It is also possible to add an antiscalant into the water supply to prevent the formation of damaging deposits inside the membrane element.
Constant Monitoring
The entire system is controlled and monitored by the OC6000 Controller, which provides you with the following:
- Automatic switching on and off of the system through monitoring of the permeate collector sensor levels and pressure of the permeate line.
- Emergency shutdown to prevent dry-running or over-pressure.
- Hydraulic flushing of membranes
- Measures the volume and flow rate of purified water.
- Constant, permanent monitoring and quality control of feed water and treated water.
Datasheet
Specifications
| Flow Capacity* at 15oC | 1.5 M3 / hour |
| RO Elements | 1 x XLE-4040 |
| Power Supply | 230v - 50Hz |
| Pump Power | 1.9 Kw |
| Inlet Pressure | 2 - 4 bar |
| Operation Pressure in RO membrane | 7 - 10 bar |
| Water Consumption (Operation Mode) | 1.9 - 2.4m3/hour |
| Water Consumption (Flush Mode) | 5.3 - 6.8 m3/hour |
| Connection Port Sizes: | |
| Feed Water | 3/4" |
| Permeate | 3/4" |
| Concentrate | 3/4" |
| System Dimensions (HxWxD) | 1500 x 700 x 600 |
Light Commercial RO Water Feed Requirements
| Water Feed Temperature | 4 - 30oC |
| Max. Residual Chlorine | 0.1 mg/L (ppm) |
| Hardness | 3 (30*) mEq/L |
| Iron | 0.1 (0.5*) mg/L (ppm) |
| Manganese | 0.05 (0.1*) mg/L (ppm) |
| Silicate | 20 (250*) mg/L (ppm) |
| Chemical Oxygen Demand | 4 mg O2/L (ppm O2) |
* capacity of the RO system depends on feed water composition and its temperature
Applications
The MO36000 Reverse Osmosis System is great for:
- Food Production
- Beverage Industry
- Farms
- Greenhouses
- Chemical Production
- Window Production
