CROSS90 Direct Flow Reverse Osmosis Filter

This RO filter from Ecosoft has high performance filtration and comes with a composite PP sediment and carbon block filter which will remove sediment and rust particles, whilst also reducing content of chlorine, chlorination byproducts, natural-organic matter and petrochemicals from your water supply. This will need to be replaced every 6 months.

600 GPD RO membrane element, purifies the water from 99.8% of impurities including bacteria, unpleasant tastes or odours and viruses,  and will need replacing every 24 months. The CROSS90 Direct Flow Reverse Osmosis Filter also comes with a CTO filter that will improve the taste and odour of the purified water. This will need replacing every 12 months.

Source water requirements

  • pH = 6.5–8.5
  • Total dissolved solids ≤ 1500 mg/L
  • Hardness ≤ 10.0 meq/L (<500 mg/L CaCO₃)
  • Chlorine ≤ 0.5 mg/L
  • Total iron ≤ 0.3 mg/L
  • Manganese ≤ 0.1 mg/L
  • Chemical oxygen demand ≤ 5 mg O₂/L
  • Total microbial count (TMC) ≤ 50 CFU/100 ml
  • Coliform index ≤ 3

If you wish to know more about this product please feel free to reach out using the contact form below:

Specifications
Flow Capacity (L / hour)90
Inlet Pressure (bar)2-4.5
Connection1/2″
Dimensions (H x W x D)458 x 140 x 435 mm
Water saving recovery55-65 %
Electrical requirement230V, 50 Hz
Filter weight11 kg
  • Direct flow RO – 1.5 liters per minute
  • Built-in automatic smart flushing program
  • Outstanding performance in water saving – Recovery rate >50%
  • Filter lifetime and water quality reminder
  • Tank-less modern and slim design
  • Easy replacement process – does not need to cut off the water source
  • Water quality sensor
  • Smart Faucet and Smart Flush
  • Water leakage protection