K2 UV

LUMINOR’s K2 line of disinfection systems are specifically designed and built to handle the challenging environments of process and manufacturing industries as well as pool and leisure applications.

Controlling microbiological (bacteria & virus) issues in water (or other viscous fluids), including E.coli , Cryptosporidium and Giardia lamblia is safe and simple with LUMINOR UV systems. UV does not affect the aesthetic quality of the fluid and the process does not add anything to the fluid, nor create any disinfection by-products.

Constructed with highly polished 316L stainless steel reactors and stainless steel enclosures, K2 uses proven low pressure amalgam (LP-AM) lamp technology for maximum power density and efficiency in a small footprint.

Unsure about needing a UV sensor or if regulations require you to add a sensor? There is no need to replace the entire system; simply add a UV sensor module to the K2 reactor as it comes with an integral sensor port built in. Plug the optional UV sensor into the pre-wired controller and the UV intensity will be displayed on the LCD output.

Control Features

  • Individual lamp status indicators (visual & audible failure indicators)
  • Lamp age monitor (visual & audible failure indicators)
  • Lamp cycle counter (tracks total on-off lamp cycles)
  • Service time monitor (tracks total system running time)
  • Chamber temperature monitor (monitors high temperatures and no flow conditions)
  • Panel temperature monitor (protects electronic circuits from extreme temperatures)
  • Remote on/off feature (allows reactor to be controlled remotely and timed with other system components)
  • Automatic reactor shut-down (user configurable)
  • Dry contact outputs
  • Minor alarm (NO/NC)
  • Major alarm (NO/NC)
  • Reactor ready (valve control feature)(NO/NC)
  • Major alarm output (audible & visual)
  • Minor alarm output (audible & visual)

If you wish to know more about this product please feel free to reach out using the contact form below:

Specifications

ModelLK5/6-A22LK5/6-A42LK5/6-A62
Flow Rate (30 mJ/cm2 @ 95% UVT)662 lpm
39.7m3/hr
1530 lpm
91.8m3/hr
2366 lpm
142m3/hr
Flow Rate
(16 mJ/cm2 @ 95% UVT)
1240 lpm
74.3m3/hr
2870 lpm
172.2m3/hr
4420 lpm
265.7m3/hr
Flow Rate
(40 mJ/cm2 @ 95% UVT)
496 lpm
29.8m3/hr
1150 lpm
68.8m3/hr
1770 lpm
106m3/hr
Port Size3″ Flange4″ Flange6″ Flange
Electrical220V / 50 – 60Hz
Lamp Watts4148281242
Power (Watts)4609001340
Replacement LampRL-1000A
(2 Required)
RL-1000A
(4 Required)
RL-1000A
(6 Required)
Replacement SleeveRQ-K2 (2 Required)RQ-K2 (4 Required)RQ-K2 (6 Required)
Chamber Material316L Stainless Steel, A249 Pressure Rated Tubing, Polished & Passivated
Reactor Dimensions10.5 x 53.7 x 15.7″
(27 x 136 x 40cm)
11 x 54.7 x 17.8″
(28 x 139 x 45cm)
11 x 54.7 x 18″
(27 x 139 x 46cm)
Controller Dimensions19 x 16.5 x 8.3
(48 x 42 x 21cm)
23 x 16.5 x 8.3
(58 x 42 x 21cm)
27 x 24.5 x 10.3
(69 x 62 x 26cm)
Operating Pressure10.3 bar (150 psi)
Operating Water Temperature2 – 40oC
(36 – 104o F)
254 mm UV Intensity Monitor(5.0) Optional Upgrade
(6.0) Yes
UVT MonitoringOptional Upgrade
Dose CalculationsOptional Upgrade
Flow MonitoringOptional Upgrade
Internal Fault HistoryYes
Remote – OnYes
Dry Contacts (Solenoid Ready)Yes
4-20 mA OutputYes
Drain PortsYes (1/2″)
Lamp Age CounterYes
Sample PortsYes (1/2″)
Lamp-Out Indicator (visual & audio)Yes
  • Eliminates Bacteria, Viruses and Oocysts from your water supply.
  • Reliable, industry proven low pressure amalgam (LP-AM) coated UV lamps with 12,000 hour lamp life
  • 316L stainless steel, polished reactors with flanged end-plate
  • Designed and Manufactured to ASME pressure vessel standards
  • Ideal for heavy water flow requirements, from 650 l/pm up to 2,400 l/pm