CROSS90 Direct Flow Reverse Osmosis Filter
Features
- Direct flow RO – 1.5 liters per minute
- Built-in automatic smart flushing program
- Outstanding performance in water saving - Recovery rate >50%
- Filter lifetime and water quality reminder
- Tank-less modern and slim design
- Easy replacement process - does not need to cut off the water source
- Water quality sensor
- Smart Faucet and Smart Flush
- Water leakage protection
CROSS90 Direct Flow Reverse Osmosis Filter
Information
This RO filter from Ecosoft has high performance filtration and comes with a composite PP sediment and carbon block filter which will remove sediment and rust particles, whilst also reducing content of chlorine, chlorination byproducts, natural-organic matter and petrochemicals from your water supply. This will need to be replaced every 6 months.
600 GPD RO membrane element, purifies the water from 99.8% of impurities including bacteria, unpleasant tastes or odours and viruses, and will need replacing every 24 months. The CROSS90 Direct Flow Reverse Osmosis Filter also comes with a CTO filter that will improve the taste and odour of the purified water. This will need replacing every 12 months.
Source water requirements
- pH = 6.5–8.5
- Total dissolved solids ≤ 1500 mg/L
- Hardness ≤ 10.0 meq/L (<500 mg/L CaCO₃)
- Chlorine ≤ 0.5 mg/L
- Total iron ≤ 0.3 mg/L
- Manganese ≤ 0.1 mg/L
- Chemical oxygen demand ≤ 5 mg O₂/L
- Total microbial count (TMC) ≤ 50 CFU/100 ml
- Coliform index ≤ 3
Datasheet
Specifications
CROSS90 Direct Flow Reverse Osmosis Filter
| Flow Capacity (L / hour) | 90 |
|---|---|
| Inlet Pressure (bar) | 2-4.5 |
| Connection | 1/2" |
| Dimensions (H x W x D) | 458 x 140 x 435 mm |
| Water saving recovery | 55-65 % |
| Electrical requirement | 230V, 50 Hz |
| Filter weight | 11 kg |
