The MO-2 Reverse Osmosis system from Ecosoft provides between 2 – 2.5m3/hour of purified water for industries such as chemical productions, agriculture and food and drink processing. A fully automated system that self-monitors and ensures that you get the best quality water possible, the MO-2 Reverse Osmosis system is an ideal solution for your water requirements.
The MO-2 is equipped with:
Further options are also available such as ECO PRO and BW30HRLE membranes for problem water, membrane rinse with permeate and raw water blending.
Before going through the reverse osmosis process, feed water is sent through sediment pre-filters to remove particles that might otherwise damage the membranes. (If you are using an antiscalant for hard water, then it is added to the water supply before the pre-filters.)
The water is then sent through the membranes via the high pressure pump. Feed water is separated into purified water (permeate) and high salt water with any other impurities (concentrate). The permeate is then sent to the outlet for use, whereas typically the concentrate would be sent to the sewer system. However, the MO-2’s recycling ability allows some of that concentrate to be sent back through the filters again, providing you with more purified water before the remaining concentrate is finally ejected.
The system can be run completely autonomously. The system will set itself to standby whenever the pure water tank is full. An automated membrane rinse also occurs every time before standby, as well as during pre-programmed intervals. The system is also able to alert you to any failures or required maintenance, such as;
If you wish to know more about this product please feel free to reach out using the contact form below:
Flow Capacity* | 2 m3/h |
Membrane Elements | 2 x Dow Filmtec XLE-4040 |
Electrical Specifications | 400v, 50Hz |
Pump Power | 4kW |
Inlet Water Pressure | 2 – 4 bar |
Operating Pressure | 7 – 10 bar |
Maximum pressure | 14 bar |
Influent Flow Rate During Service | 2.5 – 4 m3/h |
Influent Flow Rate During Rinse | 8 – 10 m3/h |
Connection Port Sizes: | |
Feed Water | DN32 |
Permeate | DN25 |
Concentrate | DN32 |
Dimensions (HxWxD): | |
Product | 1.9 x 1.7 x 1.2 m |
Crate | 2.2 x 2 x 1.5 m |
Weight: | |
Product | 400 kg |
Crate | 520 kg |
Feed Water Requirements: | |
Total Dissolved Solids | < 3000 mg/L (ppm) |
Hardness | < 150 mg/L CaCO3 (ppm CaCO3) |
Iron | < 0.1mg/L (ppm) |
Manganese | < 0.05 mg/L (ppm) |
Hydrogen Sulfide | None |
Silica | < 20 mg/L (ppm) |
Chlorine | < 0.1 mg/L (ppm) |
Silt Density Index | < 5 |
J&F Export Services Ltd
16 Brooklands Way
Basford Lane Industrial Estate
Leek, Staffordshire ST13 7QF
United Kingdom
Registered in England. Company Registration Number 4615698
VAT Number GB 810 6043 75