Anthracite Azure 370 softener

With up-flow proportional brining, a high flow rate is of up to 3 m³ of water per hour, and a large salt capacity. These softeners provide low salt consumption, easy maintenance, and efficiency. A full tank of salt is enough for a 15-month run before the next salt refill.

Specification

Components:

  1. Pre-adjusted Clack® DV
  2. Cabinet enclosure
  3. Pressure tank
  4. Brine well with safety float valve

Technical specifications

  • Flow rate:

– Operating — 2.5 m³/h

– Maximum — 2.9 m³/h

  • Quantity of DOWEX® HCR-S/S — 37 L
  • Volume capacity* — 7.5 m³
  • Usage of salt per regeneration** — 3.7–6.0 kg
  • Usage of water per regeneration — 0.37 m³
  • Duration of regeneration — 80–110 minutes
  • Pressure drop in service mode — 0.5 bar
  • Inlet pressure — 2–6 bar
  • Electrical requirements — 230 V, 50 Hz
  • Power consumption — 30 W
  • Inlet/outlet pipe connections — 1’’

*for hardness (250 mg/L CaCO₃)

**it is recommended to use Ecosil pelletized salt for regeneration

Feed water requirements

  • Hardness — 15 meq/L (750 mg/L CaCO₃)
  • Iron — 0.2 mg/L
  • Manganese — 0.05 mg/L
  • Required level of purification of sediment particles — 100 μm
  • Initial water temperature — +4…+30 °С

Weight & measurements

Dimensions, H×W×D: 1094 х 360 х 565 mm
Filter weight: 42kg

If you wish to know more about this product please feel free to reach out using the contact form below:

Specifications

Parameters
Fow Rate2.5–2.9 m³/h
Volume capacity7.5 m³/h
Operating time before salt refill15 months
Quantity of resin37L
Usage of salt per regeneration3.7 – 6.0kg
Usage of water per regeneration0.37 m³/h
  • Reliable US-made Clack® DV valve with diamond-carbon coating
  • Increased salt capacity: up to 130 kg
  • Built-in mixing valve
  • Up-flow proportional regeneration for smart consumption
  • Effective salt consumption: up to 80 grams per liter of resin or less
  • Water-saving: 100 liters for regeneration